HOW TO FIX BROTHER PRINTER ERROR E9?

Brother printer is a famous brand that is known for the best printing services. It helps to print out important documents without any trouble. Bus as we no every electronic device not free from Technical glitches. If you are one of them who are using the Brother Printer customer service number and you face any error, then you don’t need to get worried. Today we will discuss Brother Printer error code E9. This is a very common error that appears on your printer when you are printing the documents. This error occurs due to any foreign material that got stuck into the machine.


Sometimes, this error appears due to some hardware problem. If you are facing this error, then don’t take tension just follow the best troubleshooting steps to solve this error. For your help, we brought the best solutions that will help to remove Brother Printer error code E9. To remove this problem, you can apply the given solutions with ease. To overcome this problem, you can contact the experts. The experts are always here to solve Brother Printer driver customer service number related issues.

Ways to eliminate Brother Printer error E9

This is a common error that occurs due to many reasons but it also affects the printing job. To overcome this problem you need to remove this error by applying the troubleshooting solutions. There are lots of third-party service provider companies that provide solutions to solve this type of problem. But most of the solutions don’t work properly so you can apply the given solutions.

(1)    At first, lift the scanner of your printing device by using your both hands.

(2)    Then, you will see the scanner cover support arm that is located on the left side of the device.

(3)    Then, check left-hand and right-hand corners and the centre inside the printing device and remove the paper scraps, paper clip, etc. that may be jammed.

(4)    Now, you need to move the print head of the printer from left to right, check carefully for any paper scraps stuck under the print head.

(5)    Then, release the scanner cover and look at the back of the printer.

(6)    Now, open the jam clear cover and then you need to open the inside cover.

(7)    Check for any foreign objects or jammed paper and shut down the scanner cover.

(8)    If the error is fixed, go to step 11 or follow the given steps.

(9)    Unplug the printer from the power outlet for one minute and then plug it back in.

(10)Then go to the next step.

(11)Now, print a print quality check sheet.

(12)On the control panel of the brother printer, go to ‘improve print quality’ option with the help of up and down buttons.

(13)Then, press ‘start’ and PQCS will start to print.

(14)If the PQCS sheet gets printed successfully, then there is no problem with your printing device.

If the problem comes again after applying the above-mentioned steps then you don’t need to worry. The experts are always here to help. They will give you one of the best solutions without any trouble. For your help, Brother Printer tech support phone number +1-888-720-1316 is available 24*7.


(1)    How to fix Brother Printer Error Code 73?


 


Comments

  1. Get hassle-free printer wireless setup at www.easyprintershelp.com. Our expert technicians are available 24/7 to assist you with any printer connectivity issues. Call us now at +1(800)6738163 and experience seamless printing without any worries.

    ReplyDelete

Post a Comment